KL-8060E Digital Bipolar Stepper Motor Driver-32 bit DSP Based
This stepper driver is based on a DSP with an advanced control algorithm. It brings a high level of system smoothness, providing optimum torque and nulls mid-range instability. Motor auto-identification and parameter auto-configuration technology offers optimum responses with different motors and is easy-to-use. The driven motors can run with much lower noise, less heating, smoother movement than most of the drivers in the markets. Its unique features make the driver more attractive
Price
You save: $15.95! (21.28%)
KL-8060E Digital Bipolar Stepper Motor Driver-32 bit DSP Based
Product Description
ATTENTION: If you use KL-8060E to replace for the KL-8060 or any other stepper driver. pls verify your wiring.
KL-8060E 80VDC/6A Digital Stepper Driver:
Heat Sink is included.
High Performance, Based on DSP Algorithm
Anti-Resonance, provides optimum torque and nulls mid-range instability
• Motor auto-identification and parameter auto-configuration technology,
offers optimum responses with different motors
• Multi-Stepping allows a low resolution step input to produce
a higher microstep output for smooth system performance
• Microstep resolutions programmable, from full-step to 51,200 steps/rev
Can be set by Dip switch (2,4,8,16,32,64,128,256,5,10,25,50,125,250)
• Supply voltage up to +80 VDC
• Output current programmable, from 2A to 6A(Can be set by Dip switch too)
• Pulse input frequency up to 200 KHz
• TTL compatible and optically isolated input
• Full or Half Current , Sw4: Off= Half Current
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current, phase-error protection
One Year Warranty
ATTENTION: If you use KL-8060E to replace for the KL-8060 or any other stepper driver. pls verify your wiring.
Motor wires may be different
Manual:
KL-8060E User Manual (1107 downloads)
Similar Wiring Diagram:
KL-5056WithDB25 (2519 downloads)
Additional Details
Updating... 