NEMA 24 Closed Loop Stepper Motor Kit: 425 oz-in, 8mm Shaft
Price
NEMA 24 Closed Loop Stepper Motor Kit: 425 oz-in, 8mm Shaft
Product Description
NEMA 24 Closed Loop Stepper Kit Includes:
- One Closed Loop Stepper Driver KL-5080D4/CS-D508
- One NEMA24 Closed Loop Stepper Motor CS-M22430, Shaft Size 8MM
- One Encoder Cable, 3 meter
- One Motor Power Cable, 3 meter
Please set SW5 off, Sw6: Off, SW7: Off, SW8: off
Introduction:
1. KL-5080D4/CS-D508
KL-5080D4/CS-D508 is a closed loop stepper drive. When used to drive a 2-phase stepper motor in frame sizes NEMA 8, 17, 23, or 24 with incremental rotary encoder, it can close the position loop between the motor and drive and therefore eliminate the loss of step problem in an open loop system.
Feature of KL-5080D4/CS-D508:
- Step & direction or CW/CCW control modes
- Supply voltage of 20-50 VDC, maximum output current of 8.0A
- Powering 2-phase stepper motors of NEMA 8, 11, 14, 17, 23, and 24
- Fault output, brake control, or in-position output.
- No lose of steps for closed position loop
- No tuning
- No overshooting
- No torque margin
- Reduced motor heating and more efficient
- Smooth motion and super-low motor noise
- CE certified and RoHS compliant
Applications:
The KL-5080D4/CS-D508 closed loop stepper drive is suggested to be implemented along with a compatible 2-phase stepper motor (usually NEMA 17, 23 and 24) with 1000-line encoder. That closed stepper system can be used to upgrade open loop stepper systems or replace some servo systems, especially in many small to median speed applications such as CNC routers, CNC mills, CNC laser cutters, CNC plasmas, lab automation instruments, electronic equipment, small packaging machines, etc.
2. CS-M22430
The CS-M22430 is a 2 phase stepper motor with 3 N.m (425 oz-in) holding torque and integrated with a 1,000 line (4,000 counts/revolution) differential ended rotary encoder. Build with high quality materials including bearings and shaft made by Japanese manufacturers, this closed loop stepper motor can be adopted in many industrial applications with excellence performance such as high precision, low motor heating, and low vibration.
| Model: | CS-M22430 |
| Frame Size: | NEMA 24 (60mm) |
| Phase: | 2 |
| Step Angle: | 1.8° |
| Accuracy: | ±0.9° |
| Length: | 107 mm (4.21 inch) |
| Number of Wires: | 4 |
| Holding Torque: | 3N.m (425 oz-in) |
| Phase Current: | 5 A/Phase |
| Encoder Resolution: | 1000 Line (4000 counts/per revolution) |
| Voltage: | 2.3 V |
| Resistance: | 0.46 Ω |
| Inductance: | 2 mH |
| Rotor Inertia: | 0.69 kg-cm2 (0.00977 oz-in-sec2 ) |
| Shaft Size: | 8 mm (0.315 inch) |
| Shaft Type: | Single |
| Weight: | 1.5 kg (3.3 lb) |
| Insolation Class: | B |
| Insolation resistance: | Min 100 MΩ,500 VDC) |
| Operating Temperature: | -10 - 50°C (14 - 122°F) |
| Temperature Rise (Max): | 80K |
| Radial Play: | Max 0.02 mm with 450g load |
| Axial Play: | Max 0.08 mm with 900g load |
Encoder Connection
EA+: BLK, EB+: YEL, 5V: RED
EA-: BLU, EB-: GRN, GND: WHT
Motor Connection
A+: BLK, A-: RED, B+: YEL, B-: GRN
Driver Specification & Downloads
KL-5080D4 Manual (726 downloads)
Motor Specification & Torque Curve Downloads
CS-M22430 Drawing & Torque Curve (127 downloads)
One year warranty
If you need calibration cable for driver: Calibration Cable
Additional Details
Updating... 